which tank?

Hi i could really do with some advice. I have been using a kangertech sub tank mini for a few years now its been OK , but now i want to upgrade to twin coil. i bought a griffin rta with high hopes after reading a few reviews. However i have found it cant keep up with my vaping style. As an ex <a href="http://www.vapininthecape.com/eliquid_c_7.html”>smoker i like to take several deep lung fulls in quick succession and unfortunately the griffin always falls short resulting in dry burn. I have tried different wires from 24 gauge stainless to…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/which-tank.151580/”>which tank?

Sub ohm MTL…?

After months of dragging my feet I finally got hold of the Nitecore D4, charged the 18650 batteries and began using my Smok Alien.

Oh dear, bit disappointed. Fantastic clouds of vapour but that lovely hit at the back of the throat was gone! This new style of vaping was (no pun intended) was alien to me. I persisted and experimented with various settings but all I could to do to replicate my previous vaping experience (MVP 2.0 with Mini Nautilus) was to set the wattage around 16, wind down…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/sub-ohm-mtl.151547/”>Sub ohm MTL…?

Few beginner questions on Rebuild-able atomisers

So, I have recently started building my own coils…
However, I still have some general questions about a few things I am unsure about.

*I am using the SMOK AL85 with the X-Baby Tank and the SMOK X-Baby RBA*

1. If I have a 0.8 OHM wire inside why does the mod and my OHM kit measure the wire at much lower than it claims to be? (Around 0.37 OHM)

2. I am using a Samsung 25R 2500mAh battery, is it safe to go past 3.7 Volts when vaping?

3. Is it normal that my wick tastes burnt after a day…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/few-beginner-questions-on-rebuild-able-atomisers.151585/”>Few beginner questions on Rebuild-able atomisers

Aspire Nautilus 2 – Fundamentally Flawed

I've had my Nautilus 2 for a couple weeks. With 0.7ohm coils, 55VG 6mg <a href="http://www.vapininthecape.com/eliquid_c_7.html”>juice it's nice and a great taste and air flow.

I have been vaping for 6 weeks and this is my second tank.

The major, major issue with this tank is the fecking lid getting stuck on! I have tried turning it upside down when lightning and i make a effort to not tighten it up to much. Yet it still gets stuck on so damn tight! It would be easier to un-do if you didn't have such a small bit to hold on it. I have resulted to…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/aspire-nautilus-2-fundamentally-flawed.151195/”>Aspire Nautilus 2 – Fundamentally Flawed

Big baby beast tfv8 rba

I got the tfv8 rba for my big baby beast and bought extra glass for it and the first day it worked amazing but now it says check atty and short warning also the ohm jump and are not right for the build I have in so I searched the Internet for solution and found that you have to grind positive bar down as it makes to much contact with base but am worried if I do this my rba won't read right or won't be safe I have put link to video below

Has anyone…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/big-baby-beast-tfv8-rba.151587/”>Big baby beast tfv8 rba

Either I’m stupid or this isn’t very good

I’ve bought a <a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapeCige Dip Tank.

Link- https://www.gearbest.com/clearomizers/pp_640931.html

I’ve put the 0.8 coil in it.

I’ve tried it on 29, 30, 35 and 40W. I might be being silly but it’s not very enjoyable. I topped it up and let it sit for a few minutes to soak. I can’t imagine the black top that is on it is what you’re supposed to put in your mouth but it hasn’t come with another one so I’m at a loss there. Even in the tightest air flow is like a gale force wind. The <a href="http://www.vapininthecape.com/eliquid_c_7.html”>juice…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/either-i%E2%80%99m-stupid-or-this-isn%E2%80%99t-very-good.151500/”>Either I’m stupid or this isn’t very good

What watt…….

So i just went out to buy a pack of coils for my fresh out the packet Kylin RTA and managed to get a 8 in 1 coil pack.

Loads of different types of coils (List Below) but some are Ohms that i have not yet used so i was wondering what kind of wattage roughly would need to be used just so i don't burn them out.

6x Hive Coils (0.50Ω)
6x Quad Coils (0.36Ω)
6x Tiger Coils (0.36Ω)
6x Clapton Coils (0.85Ω)
6x Mix Twisted Coils (0.45Ω)
6x Flat Twisted Coils (0.36Ω)
6x Fused Clapton Coils (0.45Ω)…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/what-watt.151576/”>What watt…….

My new set up!

Hey all!

Ditched the jenson avanti tank! Now feeling a alot better after a bad start!
Got an apire cleito exo tank! First attempt was spitting e liquid! Not much vapour! Not pleasant! Really not! Took it back to shop where the guy stripped it and found an o-ring slightly out of place! Now at 70W at .16 ohms! brilliant flavour with strawberry king 3mg now from 6mg on a fuchai 200W temp control mod and a decent vapour cloud! I'm a happy bunny!

Learning curve gets steeper but worth it!…

<a href="https://www.planetofthe<a href="http://www.vapininthecape.com/eliquid_c_7.html”>vapes.co.uk/forums/new-users-corner/new-user-questions-and-discussion/threads/my-new-set-up.151522/”>My new set up!